Are you struggling to figure out how to empty your Shark vacuum? Don’t worry, we’ve got you covered!
In this article, we will guide you through the step-by-step process of emptying your Shark vacuum. By following these simple instructions, you’ll be able to effectively remove the collected dirt and debris from your vacuum.
So, let’s get started and have your Shark vacuum clean and ready for your next cleaning session in no time!
Step 1: Gather the Necessary Tools
Before you can start emptying your shark vacuum, you’ll need to gather the necessary tools.
Firstly, grab a trash bag or a bin to collect the dirt and debris. This will ensure a mess-free and efficient cleaning process.
Next, locate the release button or latch on your vacuum’s dust cup. This tool is crucial for opening the dust cup and emptying its contents.
Additionally, have a pair of gloves handy to protect your hands from any potential allergens or dirt particles. Gloves will also provide a better grip while handling the dust cup.
Lastly, keep a cleaning brush nearby to remove any stubborn dirt or hair stuck in the vacuum’s filters or brush roll.
A Find Robot button can help you locate your vacuum if it goes missing.
Having these tools ready will make the task of emptying your shark vacuum a breeze.
Step 2: Turn off and Unplug the Shark Vacuum
After you’ve finished using it, make sure to turn off and unplug the Shark vacuum. This step is crucial for your safety and to prevent any potential accidents.
To turn off the vacuum, simply press the power button located on the handle or the body of the vacuum. Once the vacuum is turned off, locate the power cord and gently unplug it from the electrical outlet. This will ensure that the vacuum is completely disconnected from the power source.
Then just plug the base power cord into an electrical outlet, flip the power switch on the back to turn it on, and a small green light on the left side of the base will illuminate, indicating it has power.
Taking the time to turn off and unplug the Shark vacuum not only protects you from any potential electrical hazards, but it also helps to conserve energy and prolong the life of your vacuum.
Step 3: Open the Dust Cup Latch
To open the dust cup latch, simply locate the latch on the side of the vacuum and press it down. This latch is designed to securely hold the dust cup in place while you vacuum, but when it’s time to empty it, you’ll need to release the latch.
Look for a small button or lever on the side of the vacuum, usually near the bottom. Once you find it, use your thumb or finger to press it down. You should feel a satisfying click as the latch releases.
Now, you can easily remove the dust cup and dispose of its contents. Be sure to empty it into a trash bag or outside to avoid any mess.
Step 4: Remove and Empty the Dust Cup
Once you’ve released the latch, simply lift out the dust cup and dispose of the contents. Removing and emptying the dust cup is a quick and easy process.
Sometimes the latch on a Shark Lift-Away vacuum gets stuck.
After you have unlocked the latch, it’s time to get rid of all the dirt and debris you’ve collected. With a simple upward motion, lift the dust cup out of the vacuum. Be careful not to spill any of the contents.
Most Shark vacuum cleaners have relatively small dust capacities, so you’ll need to empty them more frequently.
Shark vacuums use a plastic dust bin to contain dirt and debris rather than using disposable vacuum bags.
Also, unlike the i Robot vacuums, the Shark doesn’t have a self-empty automatic bin sensor.
Tip: The hinged dust cup on Shark handhelds is particularly bad for releasing clouds of dust and other debris during emptying.
Once you have the dust cup in your hands, find a suitable trash bin or bag and turn it upside down to empty the contents. Tap the dust cup gently to ensure all the dirt falls out. If needed, you can also use a brush or your fingers to remove any stubborn debris.
It can store up to 30 days’ worth of dust and debris in its bagless base, so you only need to empty it about once a month, and it features a self-cleaning brushroll that prevents hair from getting wrapped around it.
Once the dust cup is empty, you can reattach it to the vacuum and continue your cleaning journey.
Step 5: Clean and Reassemble the Shark Vacuum
Now it’s time to give your Shark vacuum a thorough cleaning and put it back together.
Start by wiping down the exterior of the vacuum with a damp cloth.
Then, remove the brush roll and clean any hair or debris that may be trapped in it. Use scissors to carefully cut away any tangled hair.
The Shark’s bin releases just enough cleaning fluid, and most importantly, it wiggles as it mops to scrub the floor.
Next, remove the filters and rinse them under cold water. Allow them to air dry completely before placing them back into the vacuum.
Empty the dust cup and wash it with warm, soapy water. Rinse it thoroughly and let it dry completely.
To enable/disable Recharge and Resume, press and hold the Clean button for 15 seconds.
In the middle, there’s a purple Clean button; just tap that to send the robot on its way.
Once everything is clean and dry, reassemble the vacuum by putting the dust cup, filters, and brush roll back in their respective places.
Tip: We always recommend emptying bagless vacuums directly into an outdoor bin.
Now your Shark vacuum is ready to tackle your cleaning tasks with maximum efficiency.
Self-Empty System
WS642AE The Shark Wandvac Self-Empty System is the powerful, lightweight cordless vacuum that empties itself.
It includes a HEPA self-empty charging base, Hyper Velocity suction power, and Power Fins brushroll to tackle dirt, debris, & more! $329.99 Buy in monthly payments with Affirm on orders over $50 The Shark® Wandvac Self-Empty System is the powerful, lightweight cordless vacuum that empties itself so you can ditch the dirty work.
Duster crevice tool Pet multi-tool Self-empty charging base You may also like Shark® Vertex® Pro Lightweight Cordless Stick Vacuum with DuoClean® PowerFins® Powerful suction Anti-allergen w/ HEPA Shark AI Ultra™ Robot Vacuum with XL HEPA Self-Empty Base Powerful vacuum 60 day capacity self-empty base No spots missed, Matrix Clean Anti-Allergen with HEPA Cleans edges and corners $17.95 Out of Stock $59.95 $329.99
Smart Feature
The Shark Clean app is well designed and makes it easy to control the IQ Robot XL and take advantage of its smart features.
Their easy-to-use designs, powerful suction, and advanced features make them an attractive choice.
It offers a number of useful smart features, including home mapping for targeted room cleaning and virtual no-go zones, perks you don’t get with the comparably priced Roomba i3+.
Frequently Asked Questions
You should empty the dust cup of your Shark vacuum regularly to ensure optimal performance.
Yes, you can wash the dust cup of your Shark vacuum. It is recommended to empty and wash the dust cup regularly to maintain optimal performance and prevent clogging.
To remove the dust cup from your Shark vacuum, simply press the release button located on the handle.
You can use any cleaning solution to clean the dust cup of your Shark vacuum. Just make sure to follow the instructions in the user manual and rinse it thoroughly before reusing.
You’ll need to read your vacuum’s instruction manual to find out how to empty your model, although the process is always straightforward.
To properly reassemble your Shark vacuum after emptying the dust cup, follow these steps:
1. Make sure all parts are clean and dry.
2. Carefully align the dust cup.
3. Snap the dust cup back into place until it locks securely.
Conclusion
So there you have it, now you know how to empty your Shark vacuum!
By following these simple steps, you can keep your vacuum running smoothly and efficiently.
Remember to gather the necessary tools, turn off and unplug the vacuum, open the dust cup latch, remove and empty the dust cup, and clean and reassemble the vacuum.
With a clean vacuum, you can ensure that your cleaning chores are done effectively.
Happy vacuuming!
