If you’re not sure how to do this, check out our guide to cleaning Shark vacuum filters.
Are you tired of your Shark vacuum not performing at its best? Well, the solution might be as simple as emptying the dust cup.
In this article, we will guide you through the quick and easy steps to empty your Shark vacuum and get it back to peak suction power.
With just a few tools and a little bit of your time, you’ll have your Shark vacuum working like new again in no time.
So let’s get started!
Shark Vacuums
And given my readers’ letters and comments, I know many of you have Shark Vacuums, too.
In the more than 12 years I’ve been using Shark vacuums, the company has come out with a crazy number of models.
However, my experience is that all Shark vacuums have the same basic parts and operate similarly.
Shark vacuums have an excellent filter system consisting of one or two (depending on the model) thick foam filters plus one made of felt; and a HEPA filter.
None of my Shark vacuums ever have, but let’s make sure.
And I prefer the Navigator line of Shark vacuums because they maneuver so well.
Step 1: Gather the Necessary Tools
First, you’ll need to gather the necessary tools to empty your shark vacuum. To begin, grab a trash bag or container to collect the debris from the vacuum’s dust cup.
Next, locate a pair of gloves to protect your hands from any dirt or allergens. You’ll also want to have a cleaning brush or toothbrush on hand to remove any stubborn dirt or hair that may be stuck in the vacuum’s filters or brushes.
Additionally, grab a small screwdriver or coin to open the dust cup or access the filters. Lastly, keep a damp cloth or sponge nearby to wipe down the exterior of the vacuum after emptying it.
Once you have these tools ready, you’ll be prepared to move on to the next step in the process.
Step 2: Locate the Dust Cup
Shark’s bagless upright vacuums are always easy to empty.
Next, you’ll need to find the dust cup on your Shark vacuum. This is where all the dirt and debris are collected during cleaning.
In order to make sure that all debris and dirt have been emptied, open the dust cap from the top and press the upper release tab.
Start by checking the front of your vacuum cleaner. Look for a latch or button that indicates the dust cup’s location. Once you’ve located it, press the release button or pull the latch to remove the dust cup from the vacuum. Be careful not to spill the contents when removing it.
Take the dust cup to a trash can and hold it over it. Press the release button again, and the bottom of the cup will open, allowing the dirt to fall into the trash. Shake the cup gently to ensure all the debris is removed.
Step 3: Remove the Dust Cup From the Vacuum
To remove the dust cup from your vacuum, simply locate the latch or button indicating its position and press or pull it accordingly. Once you have located the latch or button, press it firmly or pull it towards you, depending on the design of your vacuum. Keep in mind that different models may have slightly different mechanisms for removing the dust cup, so make sure to refer to your vacuum’s manual for specific instructions.
Each vacuum model’s dust cup release latch will be in a slightly different place, but they all essentially work in the same fashion.
Anti-Allergen Complete Seal Technology and a HEPA filter trap dust and allergens inside the vacuum cleaner. , it will pull the entire dirt cup from the cleaner.
Let it sit to air-dry for at least 24 hours.[11]X Research source 1Pull the brushroll out of the floor nozzle.How you access the brushroll will be different for each vacuum model, but it’s generally stored in a compartment at the bottom of the vacuum.
As you press or pull the latch or button, you will feel the dust cup disengage from the vacuum body. Gently lift the dust cup upwards and away from the vacuum and be careful not to spill any debris.
Uninstall the filter and clean the top of the dustbin will keep the filter dirt-free during the process.
Congratulations! You have successfully removed the dust cup from your vacuum.
Step 4: Empty the Contents of the Dust Cup
Once the dust cup is removed, carefully hold it over a trash bin and shake it gently to empty the contents. This step is crucial in maintaining the efficiency of your Shark vacuum.
As you shake the dust cup, you will notice the accumulated dirt and debris falling into the trash bin. Shake it until all the contents are completely emptied.
Shark vacuums use a plastic dust bin to contain dirt and debris rather than using disposable vacuum bags.
It is important to be cautious while performing this step, as you wouldn’t want any dust or dirt particles to fly back into the air or onto your clean floor. Take your time and ensure that the dust cup is thoroughly empty before moving on to the next step.
Step 5: Reattach the Dust Cup to the Vacuum
Now, carefully align the dust cup with the vacuum and firmly push it back into place. You want to make sure that the dust cup is securely attached so that it doesn’t come loose while you’re vacuuming. Give it a little twist to ensure that it is locked into position.
Once the dust cup is reattached, you can continue using your Shark vacuum to clean your home.
Leaving dust around too long can lead to dust mites.
To see when this happens, you just need to look at the container from time to time, and you can easily spot how much dirt there is since all dirt cups are see-through.
As there are a wide variety of Shark vacuum models, the procedure for cleaning can vary from one another.
Emptying the dust cup is an important step in maintaining the performance of your vacuum, as it allows for efficient suction and prevents any blockages. By regularly emptying the dust cup, you can ensure that your vacuum continues to effectively pick up dirt and debris, keeping your floors clean and fresh.
Frequently Asked Questions
You should empty the dust cup of your Shark vacuum regularly to maintain its efficiency.
Yes, you can wash the dust cup of your Shark vacuum with water.
If the dust cup is difficult to remove, try twisting it counterclockwise while applying gentle pressure.
It’s not necessary to wear gloves while emptying the dust cup of your Shark vacuum. However, if you have sensitive skin or are concerned about hygiene, it’s a good idea to wear gloves for added protection.
The hinged dust cup on Shark handhelds is particularly bad for releasing clouds of dust and other debris during emptying.
If the dust cup of your Shark Vacuum is too full, you can definitely use a different container to empty its contents.
Conclusion
Now that you know how to empty a Shark vacuum, keeping your vacuum clean and running efficiently will be a breeze. By following these simple steps, you can easily remove and empty the dust cup, ensuring that your vacuum is always ready for the next cleaning session.
Remember to regularly empty the dust cup to maintain optimal performance and to prevent any clogs or blockages. With a clean vacuum, you can enjoy a cleaner and healthier home.
